Whirlpool Washer Manual Test Mode

User Manual & Test Mode Guide

Diagnostic Functions

Test Mode Guide

Entering Test Mode:

  • Turn the washer dial to specific positions
  • Press and hold designated buttons in sequence
  • Wait for confirmation beeps or lights
  • Follow on-screen prompts if available

Step-by-Step Test Mode Activation

  1. Power On: Ensure the washing machine is plugged in and powered on.
  2. Dial Position: Rotate the cycle selector knob to the "Normal" cycle position.
  3. Button Sequence: Press and hold the "Start/Pause" and "Power" buttons simultaneously for 3-5 seconds.
  4. Confirmation: Wait for the machine to beep twice and display "tSt" on the control panel.
  5. Navigate Tests: Use the cycle selector knob to scroll through different test options.
  6. Select Test: Press "Start/Pause" to begin the selected diagnostic test.
  7. Exit Mode: Turn the machine off and on again to exit test mode.
Warning: Test mode should only be used by qualified technicians. Incorrect use may void warranty or cause damage.

Specifications

Model Series WTW7120HW
Type Top Load Washing Machine
Color White / Chrome
Capacity 4.8 cu. ft.
Noise Level 58 dB
Control Type Electronic Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 13.5 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 44 x 27 x 28 inches
Weight 145 lbs
Test Mode Access Button sequence diagnostic

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Drive System Warranty: 10 years on motor and transmission
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Advanced Test Mode

Comprehensive diagnostic system that allows technicians to test individual components and identify specific issues with the washing machine's operation.

Sensor Technology

Advanced sensors monitor load size, water levels, and temperature to optimize wash performance and energy efficiency.

Precision Dispense

Automatically dispenses the right amount of detergent and fabric softener based on load size and soil level.

Quick Wash Cycle

Fast washing option that cleans small loads in just 15 minutes while maintaining cleaning effectiveness.

Stain Removal Options

Specialized cycles and options for removing tough stains including wine, grass, mud, and grease.

Quiet Operation

Sound-reducing technology and vibration control system for quieter washing and spinning cycles.

Test Mode Functions Explained

Motor Test

Tests the drive motor operation at various speeds and directions

Water Valve Test

Tests hot and cold water inlet valves for proper operation

Drain Pump Test

Verifies drain pump functionality and flow rate

Sensor Calibration

Calibrates load size and water level sensors

Control Panel Test

Tests all buttons and display functions

Error Code Reset

Clears stored error codes from memory

Troubleshooting

Problem Possible Cause Solution
Test mode won't activate Incorrect button sequence, control panel issue Verify button sequence timing, check control panel connections
Motor not running in test Motor failure, wiring issue, control board problem Check motor connections, test motor directly, inspect control board
Water not filling during test Water valve failure, pressure switch issue, clogged screen Test water valves, check pressure switch, clean inlet screens
Drain not working in test Drain pump failure, clogged drain, lid switch issue Test drain pump, clear obstructions, check lid switch
Error codes in test mode Component failure, sensor issues, wiring problems Document error codes, test individual components, check wiring
Unresponsive controls Control panel failure, main board issue, power supply Test control panel, check main board, verify power supply

Test Mode Error Codes

  • F1: Motor control error - Check motor and connections
  • F2: Water fill error - Check water valves and pressure switch
  • F3: Drain error - Check drain pump and plumbing
  • F4: Temperature sensor error - Check thermistor
  • F5: Lid switch error - Check lid switch mechanism
  • F6: Control communication error - Check wiring harness

Manual Downloads

Current Model Manuals

WTW7120HW

4.8 cu. ft. Top Load Washer

WFW6620HW

4.5 cu. ft. Front Load Washer

WED6620HW

7.4 cu. ft. Electric Dryer

WGD6620HW

7.4 cu. ft. Gas Dryer

Popular Previous Models

WTW5000DW

3.5 cu. ft. Top Load Washer

WFW9200SQ

4.3 cu. ft. Front Load Washer

WED9500TW

9.0 cu. ft. Electric Dryer

WGD9500TW

9.0 cu. ft. Gas Dryer

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.