Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washing machine.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Washing Machine: Adjust the leveling legs to ensure the washing machine is level from front to back and side to side.
- Test Run: Run the washing machine through a sanitize cycle to check for leaks and proper operation.
Specifications
| Model Series | WHE5AB, WFW75HEFW, WFW85HEFW |
| Type | Front Load Washing Machine with Sanitize Cycle |
| Color | White / Chrome Shadow |
| Capacity | 4.3 - 5.0 cu. ft. |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 13 gallons per cycle (average) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 39 x 27 x 32 inches |
| Weight | 205 lbs |
| Max Spin Speed | 1200 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 10 years on motor and drive system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Sanitize Features
Sanitize Cycle with Oxi
Eliminates 99.9% of bacteria and allergens using the combination of high-temperature water and Oxi additives for thorough sanitization.
Advanced Vibration Control
Whirlpool's precision wash system reduces noise and vibration while maintaining powerful cleaning performance during sanitize cycles.
Load & Go™ Dispenser
Automatically dispenses the right amount of detergent for up to 20 loads, ensuring proper cleaning and sanitization every time.
Steam Refresh Cycle
Steam technology helps remove odors and reduce wrinkles while refreshing clothes between washes, complementing the sanitize function.
Adaptive Wash Technology
Automatically senses and adapts to load size and soil level, optimizing water usage and cleaning performance for sanitization.
Quick Wash & Sanitize
Complete sanitization in just 30 minutes using powerful wash actions and high-temperature water for time-sensitive needs.
Sanitize Cycle Programs
Allergen
Removes 95% of common household allergens using intense heat and extended rinse cycles
Sanitize with Oxi
Combines hot water with oxygen-based cleaners for maximum bacteria elimination
Steam Sanitize
Uses steam penetration to sanitize without excessive water usage
Baby Care
Special cycle for baby clothes with extra rinses and sanitization
Sports Wear
Targeted sanitization for athletic clothing with odor elimination
Bedding
Extended sanitize cycle for bedding and large items requiring thorough cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sanitize cycle not completing | Water temperature too low, overloaded machine | Ensure hot water supply, reduce load size, check water heater |
| Poor sanitization results | Wrong detergent, insufficient water temperature | Use HE detergent, verify hot water supply above 120°F |
| Water not heating | Heater element failure, thermostat issue | Contact authorized service technician |
| Unusual odors after sanitize | Detergent buildup, moisture retention | Run cleaning cycle, leave door open between uses |
| Error codes during sanitize | Temperature sensor issues, water flow problems | Check error code manual, contact service if persistent |
| Long cycle times | Large loads, cold water inlet temperature | Reduce load size, check water heater settings |
Error Codes
- F1: Water temperature issue - Check water heater and supply
- F2: Drain system error - Check drain hose and pump
- F3: Water level sensor - Contact service center
- F5: Door lock mechanism - Ensure door closes properly
- F7: Motor control - Contact service center
- F8: Heater element - Water heating system error
Manual Downloads
Current Sanitize Models
WHE5AB
5.0 cu. ft. Smart Sanitize Washer
WFW75HEFW
4.8 cu. ft. Front Load Sanitize
WFW85HEFW
4.3 cu. ft. Steam Sanitize
WFW72HEDW
4.5 cu. ft. Sanitize with Oxi
Popular Previous Models
WFW94HEAW
4.8 cu. ft. HE Sanitize
WFW92HEFU
4.3 cu. ft. Front Control
WFW85HEFW
4.3 cu. ft. Steam Sanitize
WFW7590GW
4.5 cu. ft. Gas Sanitize