Installation Guide
Tools Needed:
- Adjustable wrench
- Level tool
- Screwdrivers set
- Pipe wrench
- Tape measure
- Pliers
Step-by-Step Installation
- Location Preparation: Select a solid, level floor location near water and electrical connections with proper ventilation.
- Remove Shipping Materials: Remove all transit bolts and packaging materials from the washer drum and exterior.
- Water Connection: Connect hot and cold water supply lines to the corresponding inlet valves using new hoses only.
- Drain Setup: Install drain hose with proper high loop configuration to prevent siphoning and backflow.
- Electrical Connection: Connect to grounded 120V, 60Hz outlet. Ensure proper grounding and no extension cords.
- Level Adjustment: Adjust front leveling feet to ensure machine is perfectly level in all directions.
- Initial Test: Run diagnostic cycle to verify proper installation, check for leaks and normal operation.
Specifications
| Model Series | WFW95HEDW0 |
| Type | Front Load Washer |
| Color | White / Stainless Steel |
| Capacity | 4.8 cu. ft. |
| Noise Level | 55 dB / 72 dB |
| Control Type | Electronic Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 4,200 gallons/year |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 39 x 27 x 32 inches |
| Weight | 205 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 10 years on motor and drive system
- Additional Coverage: Optional extended service plans available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Vibration Control
Precision balancing system with multiple sensors that automatically detect and correct load imbalances during wash and spin cycles.
AccuWash™ System
Advanced wash system that senses soil levels and automatically adjusts water temperature and cycle time for optimal cleaning performance.
6th Sense Live Technology
Intelligent technology that continuously monitors and adjusts wash conditions throughout the cycle for consistent cleaning results.
Steam Refresh Cycle
Steam technology that helps remove wrinkles and odors from lightly worn clothes without traditional washing.
Load & Go™ Dispenser
Automatic detergent and fabric softener dispenser that holds enough for multiple loads, dispensing the right amount each cycle.
Quick Wash Cycle
Fast wash option that cleans small, lightly soiled loads in just 15 minutes while maintaining cleaning effectiveness.
Wash System Technology
Precision Dispense
Automatically measures and releases the optimal amount of detergent based on load size and soil level
Adaptive Wash
Automatically adjusts wash actions and time based on fabric type and soil level detection
Soft Wash
Gentle tumbling motion specifically designed for delicate fabrics and hand-wash items
Power Wash
Intensive cleaning action with increased water temperature for heavily soiled items
Eco Wash
Energy-efficient cycle that uses less water and lower temperatures while maintaining cleaning performance
Sanitize Cycle
High-temperature wash that eliminates 99.9% of common household bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't power on | Power cord issue, tripped circuit breaker, control lock activated | Check power connection, reset breaker, deactivate control lock |
| Poor cleaning performance | Overloading, incorrect detergent, clogged dispensers | Reduce load size, use HE detergent, clean dispensers |
| Water not filling | Water supply valves closed, clogged inlet screens, pressure issues | Open water valves, clean inlet screens, check water pressure |
| Water leakage | Loose connections, damaged hoses, door seal issues | Tighten connections, inspect hoses, check door seal |
| Excessive vibration | Unbalanced load, improper leveling, shipping bolts not removed | Redistribute load, re-level machine, remove shipping bolts |
| Error codes displayed | Sensor issues, mechanical problems, electronic faults | Consult error code guide, perform diagnostic mode check |
Common Error Codes
- F1: Water fill time exceeded - Check water supply and pressure
- F2: Drain time exceeded - Check drain system and pump
- F3: Water temperature issue - Check heating system
- F5: Door lock mechanism fault - Check door latch and switch
- F7: Motor control fault - Check drive system and connections
- F8: Communication error - Check electronic control board
Manual Downloads
Current Duet Series Manuals
WFW95HEDW0
4.8 cu.ft. Front Load Washer
WFW92HEFW1
4.3 cu.ft. Steam Washer
WFW85HEFW0
4.3 cu.ft. Smart Washer
WFW75HEFW1
4.2 cu.ft. HE Washer
Previous Duet Models
WFW94HEXW0
4.8 cu.ft. HE Washer
WFW87HEFW0
4.5 cu.ft. Front Load
WFW72HEFW1
4.2 cu.ft. Steam Washer
WFW65HEFW0
4.0 cu.ft. HE Washer