Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near plumbing and electrical connections with adequate ventilation.
- Remove Shipping Materials: Remove all shipping bolts, brackets, and packaging materials from the washer.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves using new hoses with rubber washers.
- Connect Drain Hose: Install drain hose into standpipe or laundry sink with proper height (minimum 39 inches from floor).
- Electrical Connection: Connect to grounded 120V, 60Hz outlet. Ensure proper grounding and do not use extension cords.
- Level the Washer: Adjust the four leveling legs to ensure washer is perfectly level in all directions.
- Test Run: Run the washer through a test cycle to check for leaks, proper operation, and vibration.
Specifications
| Model Series | WFW95HEDW / WFW94HEXW |
| Type | Front Load Washer |
| Color | White / Chrome Shadow |
| Capacity | 4.8 cu. ft. |
| Noise Level (Wash/Spin) | 55 dB / 72 dB |
| Control Type | Electronic Controls with LCD Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 8,000 gallons/year |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 39 x 27 x 32 inches |
| Weight | 205 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive Motor Warranty: 10 years on motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Precise Fill Technology
Automatically senses load size and adds the correct amount of water for optimal cleaning and energy efficiency.
Adaptive Wash Technology
Automatically adjusts wash actions and time based on soil level and fabric type for superior cleaning results.
6th Sense Live Technology
Continuously monitors and adjusts the wash cycle to ensure optimal performance and fabric care throughout the cycle.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes that can't be washed, refreshing them between wears.
Load & Go™ Dispenser
Automatically dispenses the right amount of detergent for up to 20 loads, eliminating the need to measure each time.
Quick Wash Cycle
Washes small, lightly soiled loads in just 15 minutes, perfect for last-minute laundry needs.
Wash Cycle Options
Normal
For everyday cotton and mixed fabric loads with average soil
Heavy Duty
For heavily soiled durable fabrics like jeans and towels
Delicates
Gentle cycle for delicate fabrics like silk and lace
Whites
Hot water cycle with extra cleaning power for white fabrics
Hand Wash
Ultra-gentle cycle that mimics hand washing motion
Sanitize
High-temperature cycle that eliminates bacteria and allergens
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, door not latched, control lock activated | Check power supply, ensure door clicks shut, check control lock setting |
| Poor cleaning results | Overloading, incorrect detergent, wrong cycle selection | Reduce load size, use HE detergent, select proper cycle |
| Water not draining | Clogged drain pump, kinked drain hose, drain filter blocked | Clean drain pump filter, check hose for kinks, clear obstructions |
| Leaking water | Loose hose connections, damaged door seal, over-sudsing | Tighten connections, inspect door seal, use less detergent |
| Loud noises during operation | Foreign objects in drum, unbalanced load, worn bearings | Check for objects, redistribute load, inspect bearings |
| Excessive vibration | Unlevel installation, shipping bolts not removed, unbalanced load | Level the washer, remove shipping bolts, balance load |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor failure - Contact service technician
- F5: Motor control issue - Reset washer, contact service if persists
- F7: Door lock mechanism failure - Check door latch and switch
- F8: Unbalanced load - Redistribute clothes and restart cycle
Manual Downloads
Current Model Manuals
WFW95HEDW
4.8 cu. ft. Front Load Washer
WFW94HEXW
4.8 cu. ft. Chrome Shadow
WFW92HEFU
4.3 cu. ft. Front Load
WFW85HEFW
4.3 cu. ft. White Washer
Popular Previous Models
WFW94HEAW
4.8 cu. ft. AccuWash
WFW9150WW
5.0 cu. ft. Capacity
WFW87HEDW
4.3 cu. ft. Duet
WFW75HEFW
3.8 cu. ft. Front Load