Parts Overview
Main Components:
- Drive Motor Assembly
- Door Lock Mechanism
- Water Inlet Valve
- Drain Pump
- Shock Absorbers
- Door Boot Seal
- Control Board
- Drum Spider Assembly
Parts Identification
- Motor Assembly: Includes main drive motor, rotor, and stator components
- Suspension System: Springs and shock absorbers that control drum movement
- Water System: Inlet valves, hoses, and pressure switch
- Drain System: Pump, drain hose, and filter assembly
- Electronic Components: Main control board, user interface, and sensors
- Door Assembly: Door lock, hinge, and glass components
- Drum Assembly: Inner drum, outer tub, and spider support
Common Replacement Parts
| Part Number | WPW10727457 |
| Part Name | Door Boot Seal |
| Compatible Models | Duet GHW9100, GHW9150, GHW9200 |
| Part Number | WPW10174566 |
| Part Name | Drive Motor |
| Compatible Models | All Duet Front Load Models |
| Part Number | WPW10227470 |
| Part Name | Water Inlet Valve |
| Compatible Models | Duet GHW9100, GHW9150, WFW94HEX |
| Part Number | WPW10527453 |
| Part Name | Drain Pump |
| Compatible Models | All Duet Front Load Models |
Additional Common Parts
- Shock Absorbers: WPW10727458 - Front, WPW10727459 - Rear
- Door Lock Assembly: WPW10174567
- Main Control Board: WPW10327455
- Drum Spider: WPW10627456
- Temperature Sensor: WPW10427454
For complete parts list, contact Whirlpool Parts at 1-800-253-1301 or visit WhirlpoolParts.com
Parts Installation Guide
Door Boot Replacement
Remove front panel, release tension spring, and carefully install new boot seal ensuring proper alignment and sealing.
Motor Replacement
Disconnect power, remove rear panel, disconnect wiring harness, and replace motor assembly following torque specifications.
Shock Absorber Installation
Support drum, remove old shocks, install new shocks with proper orientation and secure mounting bolts.
Water Valve Replacement
Shut off water supply, disconnect hoses, remove electrical connections, and install new valve with proper sealing.
Drain Pump Service
Access front service panel, disconnect hoses and wiring, remove pump assembly, and install replacement unit.
Control Board Replacement
Document wire connections, remove old board, transfer settings, and install new control board following ESD precautions.
Required Tools
Socket Set
Various sizes including 1/4" and 3/8" drive sockets
Screwdrivers
Phillips and flat head in multiple sizes
Pliers
Needle nose, channel lock, and lineman's pliers
Multimeter
For electrical testing and verification
Putty Knife
For gasket and seal removal
Torque Wrench
For proper bolt tightening specifications
Parts Troubleshooting
| Symptom | Possible Faulty Part | Testing Procedure |
|---|---|---|
| Washer won't start | Door lock switch, Main control board | Test door lock continuity, check control board power |
| No water filling | Water inlet valve, Pressure switch | Check valve operation, test pressure switch |
| Water won't drain | Drain pump, Drain hose | Test pump operation, check for obstructions |
| Excessive vibration | Shock absorbers, Springs | Inspect shocks for leaks, check spring tension |
| Loud noises | Motor bearings, Drum spider | Inspect motor, check drum for cracks |
| Leaking water | Door boot, Hose connections | Inspect boot for tears, check hose clamps |
Error Codes Related to Parts
- F1: Door lock failure - Replace door lock mechanism
- F2: Motor control failure - Check motor and control board
- F3: Heater failure - Replace heating element
- F5: Pressure system failure - Replace pressure switch
- F7: Temperature sensor failure - Replace thermistor
- F8: Motor triac failure - Replace control board
Parts Ordering Information
Current Model Parts
WFW9620H
Duet Front Load Washer
WFW9520H
Duet Steam Washer
WFW9420H
Duet Smart Washer
WFW9250H
Duet Compact Washer
Previous Model Parts
WFW9150H
Duet Front Load
WFW9100H
Duet Steam
WFW94HEX
Duet High Efficiency
WFW92HEX
Duet Standard