Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical outlet and venting on a solid, level floor with adequate clearance.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Exhaust Vent: Connect 4-inch diameter rigid metal duct to dryer exhaust outlet. Keep duct as straight and short as possible.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Do not use an extension cord.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and venting.
Specifications
| Model Series | WED9500TW |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 43 x 29 x 32 inches |
| Weight | 145 lbs |
| Drum Material | Stainless Steel |
| Moisture Sensor | Yes |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive Motor Warranty: 10 years limited warranty
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
AccuDry™ Temperature Management
Advanced temperature sensors automatically adjust heat levels to protect fabrics from over-drying while ensuring consistent drying results.
Wrinkle Shield™ Option
After the cycle ends, the dryer periodically tumbles clothes without heat to help prevent wrinkles for up to 120 minutes.
Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy.
Steam Refresh Cycle
Uses steam to reduce wrinkles and odors in 20 minutes, refreshing clothes without washing.
Large Capacity
7.4 cubic foot capacity handles large family loads, including bulky items like comforters and blankets.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, perfect for last-minute drying needs.
Drying Programs Explained
Auto Dry
Uses moisture sensor to automatically determine drying time based on load size and fabric type
Timed Dry
Manual setting for specific drying times from 10 to 180 minutes
Wrinkle Control
Tumbles clothes without heat after cycle to reduce wrinkles
Steam Refresh
Uses steam to remove wrinkles and odors from dry clothes
Delicates
Low heat setting for delicate fabrics and special care items
Heavy Duty
High heat setting for heavily soiled items and sturdy fabrics
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, exhaust vent blocked, overloaded | Clean lint filter, check exhaust vent, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, contact service for roller replacement |
| Dryer overheats | Restricted airflow, thermostat failure | Clean lint filter and exhaust vent, contact service center |
| Error codes displayed | Various system malfunctions | Refer to error code chart in manual, contact service if needed |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- F01: Control failure - Unplug dryer for 5 minutes, then restart
- F02: Motor triac failure - Contact service center
- F03: Motor relay failure - Contact service center
- F05: Moisture sensor failure - Clean moisture sensor bars
- F07: Heater circuit failure - Contact service center
- F08: Thermistor failure - Contact service center
- F09: High temperature fault - Check for restricted airflow
Manual Downloads
Current Model Manuals
WED9500TW
7.4 cu. ft. Electric Dryer
WGD9500TW
7.4 cu. ft. Gas Dryer
WED9620HW
7.4 cu. ft. Electric Dryer
WGD9620HW
7.4 cu. ft. Gas Dryer
Popular Previous Models
WED9200TW
7.0 cu. ft. Electric Dryer
WGD9200TW
7.0 cu. ft. Gas Dryer
WED8500DW
7.0 cu. ft. Electric Dryer
WGD8500DW
7.0 cu. ft. Gas Dryer