Whirlpool Cabrio Dryer

User Manual & Installation Guide

7.4 cu. ft Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • 4-wire power cord (if not included)

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary electrical and venting connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
  3. Install Venting System: Connect 4-inch diameter metal venting to the dryer exhaust outlet using approved vent clamps.
  4. Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Ensure proper wiring according to local codes.
  5. Gas Connection (if applicable): For gas models, connect to gas supply using approved flexible connector and check for leaks.
  6. Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
  7. Test Run: Run the dryer through a complete cycle to check for proper operation and venting.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WED9500TW
Type Electric/Gas Dryer
Color White
Capacity 7.4 cu. ft
Noise Level 65 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STAR® Certified
Power Requirements 240V, 60Hz, 30A (Electric)
Dimensions (HxWxD) 43 x 76 x 78 cm
Weight 75 kg
Vent Requirements 4-inch diameter metal venting

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on drive motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

AccuDry™ Temperature Management

Advanced temperature sensors automatically adjust drying temperatures to prevent over-drying and protect fabrics from heat damage.

Wrinkle Shield™ Option

Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in.

Steam Refresh Cycle

Uses steam to remove wrinkles and odors from clothes, refreshing items without washing.

Large Capacity Drum

7.4 cubic foot capacity allows for larger loads, reducing the number of drying cycles needed.

Advanced Moisture Sensing

Automatically detects when clothes are dry and ends the cycle, saving energy and preventing over-drying.

Quiet Operation

Sound insulation and advanced motor technology provide quiet drying performance.

Drying Programs

Auto Dry

Automatically adjusts drying time based on moisture levels for optimal results

Timed Dry

Manual drying with user-selected time settings for complete control

Quick Dry

Fast drying cycle for small loads or lightly damp items

Delicates

Gentle cycle with low heat for delicate fabrics and special care items

Heavy Duty

Extended cycle with high heat for heavily soiled or bulky items

Steam Refresh

Steam cycle to remove wrinkles and refresh clothes between washes

Troubleshooting

Problem Possible Cause Solution
Dryer won't start Power issue, door not closed properly, start button not held Check power supply, ensure door is latched completely, hold start button for 3 seconds
Clothes not drying Lint filter clogged, venting blocked, improper load size Clean lint filter, check venting system, reduce load size
Over-drying clothes Moisture sensor dirty, wrong cycle selected Clean moisture sensor, select appropriate drying cycle
Unusual noises Foreign objects in drum, worn rollers or bearings Check for foreign objects, inspect drum components
Error codes displayed Various system faults detected Refer to error code chart in manual, contact service if needed
Vibration during operation Unbalanced load, uneven floor, shipping bolts not removed Redistribute load, level the dryer, ensure shipping bolts removed

Error Codes

  • F01: Main control failure - Contact service center
  • F02: Motor control issue - Check for obstructions, contact service
  • F03: Temperature sensor failure - Contact service center
  • F05: Moisture sensor issue - Clean moisture sensor
  • F07: Heater relay fault - Contact service center
  • F09: Communication error - Power cycle unit, contact service if persists

Manual Downloads

Current Model Manuals

WED9500TW

7.4 cu. ft Electric Dryer

WGD9500TW

7.4 cu. ft Gas Dryer

WED9620HW

7.4 cu. ft Steam Dryer

WED9500VW

7.4 cu. ft Electric Dryer

Popular Previous Models

WED94HEDW

7.0 cu. ft Electric Dryer

WGD94HEDW

7.0 cu. ft Gas Dryer

WED92HEFW

7.0 cu. ft Electric Dryer

WGD92HEFW

7.0 cu. ft Gas Dryer

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.