Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical connection on a solid, level floor with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Ventilation Setup: Install 4-inch diameter rigid metal ducting to exterior vent hood. Avoid flexible plastic ducts.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Gas models require gas line connection by qualified technician.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Final Checks: Ensure lint filter is properly installed and all connections are secure.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | WED9500TW |
| Type | Electric/Gas Dryer |
| Color | White |
| Capacity | 7.0 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz (Electric) / 120V, 60Hz (Gas) |
| Dimensions (HxWxD) | 43 x 29 x 31 inches |
| Weight | 145 lbs (Electric) / 135 lbs (Gas) |
| Drum Material | Stainless Steel |
| Vent Requirements | 4-inch rigid metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive Motor Warranty: 10 years limited warranty
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
AccuDry™ Temperature Control
Advanced moisture sensing technology automatically adjusts drying time and temperature to prevent over-drying and protect fabrics.
Wrinkle Shield™ Option
Keeps clothes moving periodically after cycle ends to help prevent wrinkles from setting in for up to 150 minutes.
Steam Refresh Cycle
Uses steam to reduce wrinkles and odors in lightly worn clothes, refreshing them without washing.
Large Capacity Drum
7.0 cubic foot capacity allows you to dry large comforters and multiple loads at once, saving time and energy.
Advanced Moisture Sensing
Precisely detects moisture levels to automatically adjust drying time, preventing over-drying and saving energy.
Quiet Operation
Sound insulation and balanced drum design provide quiet operation throughout all drying cycles.
Drying Cycles Explained
Normal
Standard drying for cotton and mixed fabrics with medium to high heat
Delicates
Low heat gentle drying for delicate fabrics and synthetics
Heavy Duty
High heat extended drying for heavily soiled items and towels
Quick Dry
Fast drying cycle for small loads that need quick refresh
Air Fluff
No heat cycle that uses room temperature air to fluff fabrics
Steam Refresh
Steam cycle to reduce wrinkles and odors without washing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, cycle not selected | Check power supply, ensure door is latched completely, select cycle and press start |
| Clothes not drying | Lint filter clogged, vent system blocked, overloaded | Clean lint filter, check vent system for blockages, reduce load size |
| Over-drying clothes | Moisture sensor dirty, wrong cycle selected | Clean moisture sensor, select appropriate cycle for fabric type |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect drum components |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
| Error codes displayed | Various system faults detected | Refer to error code chart in manual, contact service if persistent |
Error Codes
- F01: Control board communication error - Power cycle unit
- F02: Motor control error - Check for obstructions
- F03: Temperature sensor error - Contact service
- F04: Moisture sensor error - Clean sensor bars
- F05: Heater error - Check heating element
- F06: Door switch error - Ensure door closes properly
- F07: Motor error - Contact service center
Manual Downloads
Current Model Manuals
WED9500TW
7.0 cu. ft. Electric Dryer
WGD9500TW
7.0 cu. ft. Gas Dryer
WED9620HW
7.4 cu. ft. Electric Dryer
WGD9620HW
7.4 cu. ft. Gas Dryer
Popular Previous Models
WED9200SQ
7.0 cu. ft. Electric Dryer
WGD9200SQ
7.0 cu. ft. Gas Dryer
WED8500DC
6.7 cu. ft. Electric Dryer
WGD8500DC
6.7 cu. ft. Gas Dryer