Whirlpool WTW6700TW1 Specs and Manual

The Whirlpool WTW6700TW1 is a top-loading washing machine with a large capacity, featuring multiple wash cycles, soil level settings, and advanced cleaning technologies. It includes options for water temperature control, spin speed adjustment, and delay start. Below are key sections covering specifications, installation, operation, features, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity tub, Control Panel, Lid, Agitator, Water Inlet Valves, Drain Pump, Power Cord.

Feature	Description
Capacity	Large capacity for bulky loads
Wash Cycles	Multiple cycles including Normal, Heavy Duty, Delicates, Quick Wash
Soil Level	Adjustable soil level settings (Light, Normal, Heavy)
Water Temperature	Hot, Warm, Cold selections
Spin Speed	Adjustable spin speeds
Delay Start	Delay wash start up to 24 hours
Deep Water Wash	Option for extra water level
Lid Lock	Safety lid lock during operation
Status Lights	LED indicators for cycle progress
Power	120V AC, 60Hz

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take off transit bolts and packing.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry tub.
Level the washer: Adjust leveling legs for stability.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

After installation, run an initial cleaning cycle.

Add detergent: Pour manufacturer-recommended amount into dispenser.
Select cycle: Choose Normal cycle with hot water.
Run empty cycle: Start washer to clean interior and check operation.
Test functions: Verify all cycles and settings work properly.

CAUTION! Ensure washer is level and not touching walls or other appliances.

Specifications

Model: WTW6700TW1
Type: Top-Loading Washer
Capacity: Large capacity (specific cubic feet)
Color: White
Control Type: Electronic
Water Connections: Hot and Cold
Voltage: 120V AC, 60Hz
Dimensions: Standard washer dimensions
Weight: Approx. weight when empty
Warranty: 1-year limited warranty

Controls and Settings

Control Panel: Power Button, Cycle Selector Knob, Temperature Buttons, Soil Level Buttons, Spin Speed Buttons, Start/Pause, Delay Start.

Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin, Drain & Spin. Settings: Water Temperature (Hot, Warm, Cold), Soil Level (Light, Normal, Heavy), Spin Speed (High, Medium, Low, No Spin), Delay Start (1-24 hours), Deep Water Wash option.

Connecting Water Supply

Hot and cold water connections required.

Turn off water supply before connecting hoses.
Connect hoses: Red to hot water faucet, blue to cold water faucet.
Secure connections: Tighten by hand, then a quarter turn with pliers.
Check for leaks: Turn on water supply and inspect connections.

Tip: Use only new hoses; replace old hoses to prevent failure.

Using Wash Cycles

Follow these steps for optimal washing results.

Load laundry: Do not overload; leave space for agitation.
Add detergent: Use recommended type and amount.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Choose temperature, soil level, spin speed.
Start wash: Press Start/Pause button.
Pause/stop: Press Start/Pause to pause; turn knob to Off to cancel.

WARNING! Do not open lid during spin cycle. Wait for lid lock to release.

Special Features

Deep Water Wash: Adds extra water for heavily soiled loads. Delay Start: Set wash to begin later. Quick Wash: Reduced time for lightly soiled loads. Bulky Items Cycle: For blankets, comforters.

Care & Cleaning

Regular cleaning maintains performance.

Clean exterior: Wipe with damp cloth; no abrasive cleaners.
Clean interior: Run cleaning cycle monthly with washer cleaner.
Clean dispensers: Remove and rinse detergent, bleach, fabric softener dispensers.
Check hoses: Inspect for wear or leaks annually.

CAUTION! Unplug before cleaning. Do not use harsh chemicals.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Water doesn't drain	Drain hose/clog	Ensure drain hose is not kinked; check for clog in pump filter.
Excessive vibration	Leveling/load	Level washer; redistribute load evenly.
Leaking water	Loose connections	Tighten hose connections; check tub seal.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com