Whirlpool WTW6120HW2 User Manual

The Whirlpool WTW6120HW2 is a top-loading washing machine with a large capacity, multiple wash cycles, and advanced features for efficient cleaning. It includes options for water temperature, spin speed, soil level, and special settings for different fabric types. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading agitator, Control Panel with digital display, Water Inlet Valves, Drain Pump, Lid Lock, and multiple wash settings.

Feature	Description
Large Capacity Tub	Handles large loads for family laundry
Multiple Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, etc.
Water Temperature Control	Hot, Warm, Cold options
Spin Speed Control	Adjustable spin speeds for different fabrics
Soil Level Selection	Light, Normal, Heavy soil settings
Deep Water Wash Option	Extra water for heavily soiled items
Delay Start	Set wash cycle to begin later
Lid Lock System	Safety feature during wash cycle
End of Cycle Signal	Audible alert when cycle completes
Energy Star Certified	Energy efficient operation

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take off transit bolts and packaging.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Level the machine: Adjust leveling legs for stability.
Plug into grounded electrical outlet.

WARNING! Machine is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Check water connections: Turn on water supply valves, check for leaks.
Run clean cycle: Use empty tub with bleach to clean interior.
Set preferences: Adjust default settings if needed via control panel.
Load laundry: Sort clothes by color and fabric type.

CAUTION! Ensure machine is level to prevent vibration. Do not overload.

Specifications

Capacity: 4.5 cubic feet.
Dimensions: 27" W x 27" D x 43" H.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and Cold inlet hoses.
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin.
Options: Deep Water, Extra Rinse, Pre-Soak, Delay Start.
Control Type: Electronic with digital display.
Agitator Type: Dual-action agitator.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via Control Panel. Buttons: POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, SOIL LEVEL, OPTIONS, START/PAUSE.

Display: Shows cycle time, settings, and status messages.

Cycle Selection: Choose from available wash cycles. Temperature: Hot, Warm, Cold, Tap Cold. Spin Speed: High, Medium, Low, No Spin. Soil Level: Light, Normal, Heavy. Options: Deep Water, Extra Rinse, Pre-Soak, Delay Start (1-12 hours).

Connecting Water Supply

Hot and Cold water inlets; Drain hose connection.

Turn off water supply before connecting hoses.
Connect hot water hose to hot faucet; cold to cold faucet.
Secure drain hose to standpipe (minimum height 39 inches).
Turn on water supply and check for leaks.

Tip: Use thread seal tape on hose connections for better seal.

Using Wash Cycles

Supports various fabric types and soil levels.

Sort laundry: Separate by color, fabric, and soil level.
Add detergent: Use recommended amount in dispenser.
Select cycle: Choose based on load type (e.g., Normal for cottons).
Set options: Adjust temperature, spin speed, soil level.
Start cycle: Press START/PAUSE; lid will lock during wash.
Unload promptly: Remove clothes after cycle to prevent wrinkles.

WARNING! Do not open lid during wash cycle. Wait for lid lock to release.

Special Features

Delay Start: Set wash to begin up to 12 hours later. Deep Water: Extra water for heavily soiled loads. Extra Rinse: Additional rinse cycle for sensitive skin. Pre-Soak: Soak clothes before washing to remove stains.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean interior monthly with washer cleaner or bleach cycle.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Level machine; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose for obstructions; clean pump filter.
Error codes on display	System fault	Refer to manual for code meaning; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-253-1301; www.whirlpool.com