Whirlpool Washer WTW8900BC0 Manual

The Whirlpool WTW8900BC0 is a high-efficiency top-load washer with 4.8 cubic foot capacity, featuring the IMPELLA wash system, 14 wash cycles, 5 soil levels, 5 spin speeds, stainless steel wash basket, electronic controls with LED display, automatic temperature control, deep water wash option, and energy-saving features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel wash basket, IMPELLA wash system, electronic control panel, LED display, water inlet valves, drain pump, and leveling legs.

Feature	Description
IMPELLA Wash System	Gentle yet effective cleaning motion
4.8 cu. ft. Capacity	Large capacity for family-sized loads
14 Wash Cycles	Includes Normal, Heavy, Delicates, Quick Wash
5 Soil Levels	Light, Normal, Heavy, Extra Heavy, Max
5 Spin Speeds	Delicate, Low, Medium, High, Max
LED Display	Shows cycle time, settings, and status
Deep Water Wash	Extra water option for heavily soiled items
Automatic Temperature Control	Maintains consistent water temperature
Stainless Steel Basket	Durable and rust-resistant
Energy Star Certified	Energy and water efficient operation

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove transit bolts and packaging.
Level the washer: Adjust leveling legs until washer is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Ensure proper drainage into standpipe or laundry tub.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure before use.

First-Time Setup

Power on washer; follow initial setup procedure.

Run initial cycle: Select Clean Washer cycle and run without laundry.
Set preferences: Configure default settings like temperature and spin speed.
Test operation: Run a small load to verify proper functioning.
Familiarize with controls: Review cycle options and settings.

CAUTION! Ensure washer is level and all shipping materials removed before first use.

Specifications

Capacity: 4.8 cubic feet
Dimensions: 28" W x 28" D x 43" H
Wash Cycles: 14 cycles including Normal, Heavy, Delicates, Quick Wash
Soil Levels: 5 levels (Light to Max)
Spin Speeds: 5 speeds (Delicate to Max)
Water Connection: Hot and Cold water inlet
Power Requirements: 120V, 60Hz
Control Type: Electronic with LED display
Warranty: 1-year full, 10-year limited on transmission

Controls and Settings

Access settings via control knob and buttons. Control Panel: POWER, CYCLE KNOB, START/PAUSE, OPTIONS.

Cycle Selection: Turn knob to select desired wash cycle. Options: Temperature, Spin Speed, Soil Level, Deep Water, Delay Start.

Settings: Water temperature (Cold, Warm, Hot), Spin speed (Delicate to Max), Soil level (Light to Max), Deep Water option, Delay Start (1-12 hours). Special cycles: Clean Washer, Sanitize, Bulky Items, Hand Wash.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Drain hose to standpipe or laundry tub.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old hoses.
Ensure drain hose is properly secured and not kinked.
Verify electrical outlet is grounded and dedicated circuit recommended.

Tip: Check for leaks after initial connections before first use.

Operating the Washer

Supports various fabric types and soil levels.

Load laundry: Sort by color and fabric type; do not overload.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Set temperature, spin speed, soil level as needed.
Start cycle: Press START/PAUSE to begin wash cycle.
Monitor progress: LED display shows remaining time and current cycle.
Unload promptly: Remove laundry immediately after cycle completion.

WARNING! Do not overload washer. Use only HE detergent.

Special Features

Clean Washer Cycle: Runs without laundry to clean interior. Sanitize Cycle: Uses hot water to sanitize items. Delay Start: Program wash cycle to start later. Deep Water Wash: Extra water for heavily soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean door seal and interior regularly. Run Clean Washer cycle monthly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/doors	Check power cord; ensure door is closed; press START firmly.
No water filling	Water supply	Check water valves are on; verify hoses not kinked.
Water won't drain	Drain hose	Check for kinks; ensure proper drain height; clean filter.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly.
Error codes displayed	Various issues	Refer to error code chart in manual; reset if needed.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-253-1301; www.whirlpool.com