Whirlpool Washer WTW8127LW2 Manual

The Whirlpool WTW8127LW2 is a top-loading washing machine with a large capacity, multiple wash cycles, and advanced features for efficient laundry care. It includes options for water temperature, spin speed, soil level, and special functions like a deep water wash and a quick wash cycle. Below are key sections for safety, features, installation, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity tub, Control Panel with digital display, Lid, Agitator, Water inlet valves, Drain pump, Leveling legs.

Feature	Description
Control Panel	Digital display with cycle selection buttons
Wash Cycles	Multiple cycles including Normal, Heavy Duty, Delicates, Quick Wash
Water Temperature Options	Hot, Warm, Cold selections
Spin Speed Options	High, Medium, Low, No Spin
Soil Level Options	Heavy, Normal, Light
Deep Water Wash	Extra water option for bulky items
Lid Lock	Safety feature during operation
Delay Start	Set wash to begin later
Signal	End-of-cycle signal can be turned on/off
Power	Turns washer on/off

Installation

Unpack and inspect contents. Place on a level floor.

Remove shipping materials: Take off transit bolts and brackets from rear.
Connect water supply: Attach hot and cold water hoses to corresponding faucets and inlet valves.
Connect drain hose: Secure to standpipe or laundry tub.
Level the washer: Adjust front leveling legs to prevent vibration.
Plug into a grounded 120V AC outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

After installation, run an initial rinse cycle.

Add detergent: Pour 1/2 cup of liquid bleach (no clothes) into the tub.
Select cycle: Choose "Normal" with hot water and high spin.
Start washer: Close lid and press START to clean the tub.
Set preferences: Use control panel to set default signal, options.

CAUTION! Do not use the washer without removing shipping bolts. Ensure washer is level.

Specifications

Capacity: 4.5 cu. ft.
Color: White.
Control: Electronic with digital display.
Water Connections: Hot and cold water inlet hoses.
Voltage: 120V AC, 60Hz.
Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin, Bulky Items.
Special Features: Deep Water Wash, Delay Start, Lid Lock, End-of-cycle signal.
Dimensions: Standard top-load dimensions.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via the control panel. Power Button: Turns washer on/off.

Cycle Selection: Use knob or buttons to select wash cycle. Options: Water Temperature (Hot/Warm/Cold), Spin Speed (High/Med/Low/No Spin), Soil Level (Heavy/Normal/Light). Additional Options: Deep Water, Signal On/Off, Delay Start (1-12 hours). Start/Pause: Begin or pause cycle.

Display: Shows cycle time, settings, and status messages.

Connecting Water Supply

Hot and cold water hoses: Connect to corresponding faucets (marked H and C). Drain hose: Secure to standpipe (minimum height 39 inches).

Turn off water faucets before connecting hoses.
Use only new hoses; do not reuse old ones.
Ensure drain hose is not kinked and is properly secured.

Tip: Check for leaks after first use. Use thread seal tape on connections if needed.

Using Wash Cycles

Supports various fabrics and soil levels.

Load clothes: Do not overload; leave space for agitation.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Choose based on fabric type (e.g., Normal for cottons).
Set options: Adjust temperature, spin speed, soil level as needed.
Start: Close lid and press START; lid will lock during wash.
Unload: Wait for lid to unlock after cycle ends.

WARNING! Do not open lid during spin cycle. Balance load to reduce vibration.

Special Features

Deep Water Wash: Adds more water for bulky items. Delay Start: Set wash to begin later (1-12 hours). Signal: Turn end-of-cycle signal on/off in settings. Quick Wash: For lightly soiled loads (approx. 30 minutes).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean tub monthly.

Cleaning Tub: Run a hot water cycle with washer cleaner or bleach (no clothes). CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Whirlpool Corporation. All trademarks owned by Whirlpool, U.S.A. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; outlet has power; close lid securely.
No water filling	Water supply/hoses	Check faucets are on; hoses not kinked; inlet filters clean.
Excessive vibration	Leveling/load	Adjust leveling legs; redistribute load evenly.
Water leaks	Loose connections	Tighten hose connections; check drain hose for proper placement.
Clothes still wet	Spin speed/drain	Select higher spin speed; check drain hose for clogs.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com