Whirlpool Washer WTW4816FW Manual

The Whirlpool WTW4816FW is a top-loading washer with 3.5 cu. ft. capacity, featuring multiple wash cycles, soil levels, temperature settings, and spin speeds. It includes options for deep water wash, quick wash, and extra rinse. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading and Operation 7. Cycle Guide 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with cycle selector, lid lock, agitator, water inlet valves, drain pump, and leveling legs.

Feature	Description
Capacity	3.5 cubic feet
Wash Cycles	Normal, Heavy, Delicates, Quick Wash, Bulky Items
Soil Levels	Light, Normal, Heavy
Temperature Settings	Hot, Warm, Cold
Spin Speeds	High, Medium, Low
Deep Water Wash	Extra water for heavily soiled loads
Extra Rinse	Additional rinse cycle
Lid Lock	Safety feature during operation
Delay Start	Program wash to start later
Signal	End of cycle alert

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove bolts and brackets from rear.
Level the washer: Adjust front leveling legs to prevent vibration.
Connect water supply: Attach hot and cold hoses to faucets.
Connect drain hose: Place in standpipe or laundry tub.
Plug into grounded electrical outlet.

WARNING! Do not remove ground prong from plug. Ensure water connections are tight to prevent leaks.

First-Time Setup

Run initial cleaning cycle before first use.

Remove all packaging materials from inside drum.
Connect to water and power sources.
Run clean washer cycle with bleach to remove residues.
Select desired settings for first load.

CAUTION! Ensure washer is level and all shipping materials are removed.

Specifications

Capacity: 3.5 cubic feet
Dimensions: 27" W x 27" D x 43" H
Voltage: 120V, 60Hz
Water Connections: Hot and cold water inlet
Max Spin Speed: 700 RPM
Cycle Options: 10 wash cycles, 5 soil levels
Control Type: Electronic with dial and buttons
Warranty: 1-year limited warranty
Color: White

Controls and Settings

Control Panel: Cycle selector knob, temperature buttons, soil level buttons, options buttons.

Cycle Selection: Turn knob to desired cycle (Normal, Heavy, Delicates, Quick Wash, Bulky Items, Rinse/Spin, Drain/Spin).

Temperature: Select hot, warm, or cold for wash and rinse. Soil Level: Choose light, normal, or heavy soil. Options: Deep Water Wash, Extra Rinse, Delay Start, Signal On/Off. Start/Pause: Begin or pause cycle.

Loading and Operation

Proper loading ensures optimal cleaning performance.

Sort laundry by color and fabric type.
Load items loosely around agitator; do not overpack.
Add detergent to dispenser or directly to drum.
Select cycle, temperature, and options.
Close lid and press Start.

Tip: For best results, use HE (High Efficiency) detergent and follow load size recommendations.

Cycle Guide

Understanding cycle options for different laundry needs.

Cycle	Use For	Default Settings
Normal	Regular fabrics, mixed loads	Warm/Warm, Normal soil
Heavy	Heavily soiled items	Hot/Cold, Heavy soil
Delicates	Sheer fabrics, lingerie	Cold/Cold, Light soil
Quick Wash	Lightly soiled items	Warm/Cold, Light soil
Bulky Items	Comforters, blankets	Warm/Cold, Normal soil
Rinse/Spin	Additional rinsing	Cold rinse only
Drain/Spin	Draining water	Spin only

Care & Maintenance

Regular maintenance ensures long-lasting performance.

Clean exterior with damp cloth; avoid harsh chemicals.
Monthly: Run clean cycle with washer cleaner or bleach.
Check and clean filter if applicable.
Inspect hoses for wear; replace every 5 years.
Keep area around washer clean and dry.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

UL listed; meets ENERGY STAR® requirements for energy efficiency. Manufactured to Whirlpool Corporation quality standards. Copyright © 2025 Whirlpool Corporation. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Lid open/power issue	Close lid securely; check power cord; ensure outlet works.
No water filling	Water supply/valves	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load balance	Level washer; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose position; clear obstructions.
Poor cleaning	Detergent/loading	Use correct detergent amount; avoid overloading.
Leaking water	Hose connections	Tighten hose connections; replace damaged hoses.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-253-1301; www.whirlpool.com