Whirlpool Washer Model WTW5010LW0 Manual

The Whirlpool WTW5010LW0 is a top-loading washing machine featuring an Extra-Large Capacity Tub, 10 Wash Cycles, 5 Soil Levels, 5 Spin Speeds, the Deep Water Wash Option, the Deep Fill Option, and the AccuWash™ Cycle Guide. It includes a Porcelain Basket, Automatic Temperature Control, End-of-Cycle Signal, and Delay Wash. Below are key sections for safety, features, installation, setup, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Lid, Agitator, Porcelain Basket, Water Inlet Valves, Drain Pump, Leveling Legs, Power Cord.

Feature	Description
Extra-Large Capacity Tub	Handles large laundry loads efficiently
10 Wash Cycles	Includes Normal, Heavy, Delicates, Quick Wash, and more
5 Soil Levels	Light, Normal, Heavy, Extra Heavy, and Max for customized cleaning
5 Spin Speeds	Adjustable spin speed for different fabric types
Deep Water Wash Option	Adds more water for heavily soiled items
Deep Fill Option	Allows manual selection of water level
AccuWash™ Cycle Guide	Helps select the right cycle and settings
Porcelain Basket	Durable and gentle on clothes
Automatic Temperature Control	Mixes hot and cold water to selected temperature
Delay Wash	Delays start of wash cycle up to 12 hours

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove shipping materials: Take off cardboard base and shipping bolts from rear.
Level the washer: Adjust the four leveling legs; use a level to ensure machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets (red for hot, blue for cold).
Connect drain hose: Secure to standpipe or laundry tub; use hose clip provided.
Plug into a grounded 120V, 60Hz AC outlet.

WARNING! Do not remove shipping bolts until washer is in final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run an initial cleaning cycle.

Turn on water supply: Fully open hot and cold water faucets.
Power on: Plug in washer or ensure power is connected.
Run Clean Washer cycle: Add a washing machine cleaner or 1 cup of bleach, select Clean Washer cycle, and run without clothes.
Familiarize with controls: Review cycle guide and settings.

CAUTION! Do not use the washer without removing shipping bolts. Ensure it is level to prevent excessive vibration.

Specifications

Model: WTW5010LW0
Type: Top-Loading Automatic Washer
Capacity: Extra-Large (specific cu. ft.)
Cycles: 10 (Normal, Heavy, Delicates, Quick Wash, Bulky Items, Whitest Whites, Colors, Hand Wash, Rinse & Spin, Clean Washer)
Soil Levels: 5 (Light, Normal, Heavy, Extra Heavy, Max)
Spin Speeds: 5 (Delicate, Low, Medium, High, Max)
Options: Deep Water Wash, Deep Fill, Delay Wash, Pre-Soak
Control: Electronic with Cycle Knob and Push Buttons
Power Source: 120V AC, 60Hz, 15A
Water Supply: Hot and Cold water connections required

Controls and Settings

Access settings via the control panel. Main components: CYCLE KNOB, START/PAUSE button, OPTIONS buttons (Deep Water, Deep Fill, etc.), and STATUS LIGHTS.

Cycle Selection: Turn knob to desired wash cycle (Normal, Heavy, Delicates, etc.). Soil Level: Press SOIL button to cycle through Light to Max. Spin Speed: Press SPIN button to select speed. Options: Press DEEP WATER, DEEP FILL, or DELAY WASH to activate. Start/Pause: Press to begin cycle or pause mid-cycle.

Settings: Water Temperature (Auto-Temp, Cold, Warm, Hot), Rinse Options (Normal, Deep Rinse), and End-of-Cycle Signal (On/Off).

Connecting Water Supply

Hot and Cold water hoses required. Drain hose must be properly secured.

Turn off water supply at faucets before connecting hoses.
Connect red hose to hot water faucet; blue hose to cold water faucet. Hand-tighten, then use pliers for an additional quarter turn.
Place drain hose into a standpipe (minimum height 39") or laundry tub. Use hose clip to secure.
Check for leaks by turning on water supply briefly before first use.

Tip: Use only new hoses; do not reuse old hoses. Ensure drain hose is not kinked.

Using Wash Cycles

Supports a variety of fabrics and soil levels.

Load laundry: Do not overload; items should move freely.
Add detergent: Pour into detergent dispenser or directly into tub (follow detergent instructions).
Select cycle: Turn knob to desired cycle (e.g., Normal for everyday items).
Adjust settings: Select Soil Level, Spin Speed, and any Options (Deep Water, etc.).
Start: Close lid and press START/PAUSE.
Pause/Add item: Press START/PAUSE to pause; you may add a forgotten item within a few seconds.
End of cycle: Signal will sound; remove clothes promptly to reduce wrinkling.

WARNING! Do not open lid during spin cycle. Ensure all pockets are empty of objects.

Special Features

Deep Water Wash: Adds more water for heavily soiled loads. Deep Fill: Allows manual water level selection. Delay Wash: Set start time up to 12 hours later. Clean Washer Cycle: Runs a maintenance cycle to clean the tub. AccuWash™ Cycle Guide: Printed on lid for quick reference.

Care & Cleaning

Unplug before cleaning. Wipe exterior with a soft, damp cloth. Clean detergent dispenser regularly. Run Clean Washer cycle monthly using washer cleaner or bleach. Keep area around washer clean and dry.

CAUTION! Do not use abrasive cleaners or solvents. Do not spray water directly on controls.

Regulatory Information

This appliance complies with FCC Part 15 Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Whirlpool Corporation. All trademarks are owned by Whirlpool Corporation or its subsidiaries. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Lid open/power	Close lid securely; check power cord is plugged in; ensure water supply is on.
No water filling	Water supply/kinks	Check water faucets are on; inspect hoses for kinks; ensure inlet screens are not clogged.
Excessive vibration/noise	Unlevel/overload	Ensure washer is level; redistribute load evenly; remove shipping bolts.
Water leaks	Loose connections	Tighten water hoses; check drain hose connection; ensure tub seal is intact.
Clothes too wet after spin	Spin speed/drain	Select higher spin speed; check drain hose for kinks or blockage.
Error codes displayed	Various faults	Refer to manual error code chart; unplug washer for 5 minutes, then retry.

Reset: Unplug washer for 1 minute to reset control. For persistent issues, consult manual.

Service: 1-800-253-1301; www.whirlpool.com