Whirlpool Washer Model WTW5000DW0 Manual

The Whirlpool WTW5000DW0 is a top-loading washing machine with a large capacity, multiple wash cycles, and energy-efficient features. It includes options for temperature control, spin speed, soil level, and fabric care settings. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Agitator, Lid, Water inlet valves, Drain pump, Power cord.

Feature	Description
Control Panel	Digital display with cycle selection and settings
Agitator	Dual-action for thorough cleaning
Lid Lock	Safety feature during operation
Multiple Cycles	Normal, Heavy Duty, Delicates, Quick Wash, etc.
Temperature Control	Hot, Warm, Cold water options
Spin Speed Control	Adjustable for different fabrics
Soil Level	Light, Normal, Heavy settings
Delay Start	Set wash cycle to begin later
Energy Efficient	Meets ENERGY STAR® requirements
Capacity	Large tub for bigger loads

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take out transit bolts and packaging.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry tub.
Level the washer: Adjust feet to prevent vibration.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; run a cleaning cycle.

Remove any packing material inside tub.
Connect water hoses and turn on water supply.
Plug in power cord.
Run a Clean Washer cycle (if available) or a normal cycle with bleach to remove residues.
Familiarize with control settings: Select cycle, temperature, spin speed.

CAUTION! Ensure washer is level to avoid excessive vibration during spin.

Specifications

Model: WTW5000DW0
Type: Top-Loading Agitator Washer
Capacity: Large capacity (specific cu. ft.)
Color: White
Control: Electronic with digital display
Cycles: Multiple including Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items
Options: Delay Start, Extra Rinse, Pre-Wash
Water Supply: Hot and Cold water connection required
Power Source: 120V AC, 60Hz, 15 Amp grounded outlet
Dimensions: Standard washer dimensions

Controls and Settings

Access settings via control panel. Main Controls: POWER, CYCLE SELECTION, START/PAUSE.

Cycle Selection: Turn knob to select desired wash cycle.

Settings: Temperature (Hot/Warm/Cold), Spin Speed (High/Medium/Low/No Spin), Soil Level (Light/Normal/Heavy), Options (Delay Start, Extra Rinse, Pre-Wash). Display shows remaining time, selected settings, and status messages.

Connecting Utilities

Water Supply: Hot and cold hoses. Drain: Hose to standpipe or tub.

Turn off water faucets before connecting hoses.
Connect hot hose to hot faucet, cold to cold faucet.
Secure drain hose to prevent slipping.
Plug power cord into grounded outlet.

Tip: Check for leaks after connections; run a test cycle.

Using Wash Cycles

Supports various fabrics and soil levels.

Load clothes: Do not overload; distribute evenly.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Turn knob to desired cycle (e.g., Normal for everyday items).
Adjust settings: Set temperature, spin speed, soil level, and options.
Start: Press START/PAUSE; lid will lock.
Pause: Press START/PAUSE to pause; lid unlocks after a few seconds.
Cycle end: Washer beeps; lid unlocks; remove clothes promptly.

WARNING! Do not open lid during spin cycle. Keep hands away from moving parts.

Special Features

Delay Start: Set wash to begin up to 24 hours later. Extra Rinse: Adds rinse for sensitive skin. Pre-Wash: Soaks heavily soiled items before main wash. Quick Wash: Reduced time for lightly soiled loads.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean lint filter regularly. Run Clean Washer cycle monthly with washer cleaner or bleach.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Whirlpool Corporation; trademarks owned by Whirlpool, U.S.A. Energy Star: Meets energy efficiency guidelines. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Water supply/hoses	Check water faucets are on; inspect hoses for kinks; ensure inlet filters clean.
Excessive vibration	Leveling/load	Level washer; adjust feet; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose for kinks; clean pump filter; ensure standpipe not blocked.
Leaking water	Connections/hose	Tighten hose connections; check for cracks in hoses; ensure drain hose secured.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com