Whirlpool Model WTW7120HW0 Manual

The Whirlpool WTW7120HW0 is a top-loading washing machine with a large capacity, multiple wash cycles, and advanced features for efficient laundry care. It includes options for water temperature, spin speed, soil level, and special settings for various fabric types. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Lid, Agitator, Tub, Water Inlet Valves, Drain Pump, Leveling Legs.

Feature	Description
Large Capacity Tub	Handles bulky items and large loads efficiently
Multiple Wash Cycles	Includes Normal, Heavy Duty, Delicates, Quick Wash, and more
Water Temperature Selection	Hot, Warm, Cold options for optimal cleaning
Spin Speed Control	Adjustable spin speeds for different fabric types
Soil Level Selection	Light, Normal, Heavy settings based on dirt level
Deep Water Wash Option	Extra water for heavily soiled loads
Delay Start	Set wash cycle to begin at a later time
Lid Lock	Safety feature prevents opening during cycle
Status Lights	Indicate cycle progress and machine status
End of Cycle Signal	Audible alert when wash is complete

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping materials: Take off transit bolts and packing.
Level the washer: Adjust front leveling legs until machine is stable.
Connect water supply: Attach hot and cold water hoses to faucets and inlet valves.
Connect drain hose: Secure to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use caution when moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Check water connections: Turn on water faucets and check for leaks.
Select test cycle: Choose Normal cycle and run without clothes to flush system.
Set preferences: Adjust default settings like signal volume if desired.
Load laundry: Sort clothes and load evenly in tub.

CAUTION! Do not install in areas with freezing temperatures. Keep area around washer clear.

Specifications

Model: WTW7120HW0
Type: Top-Loading Automatic Washer
Capacity: Large capacity (specific cubic feet as per model)
Voltage: 120V AC, 60Hz
Water Connections: Hot and Cold water inlet hoses
Cycle Options: Multiple cycles including Normal, Heavy Duty, Delicates, Quick Wash
Controls: Electronic with dial and button interface
Dimensions: Standard washer dimensions (refer to manual for exact measurements)
Weight: Approximate weight when empty

Controls and Settings

Access settings via control panel. Main Controls: POWER, CYCLE SELECTION KNOB, START/PAUSE, OPTIONS BUTTONS.

Cycle Knob: Turn to select desired wash cycle (Normal, Heavy Duty, Delicates, etc.).

Options: Water Temperature (Hot, Warm, Cold), Spin Speed (High, Medium, Low, No Spin), Soil Level (Light, Normal, Heavy), Deep Water, Delay Start, Signal On/Off. Display: Shows time remaining, cycle status, and selected options.

Connecting Water & Drain

Water Supply: Hot and cold hoses. Drain: Drain hose to standpipe or sink.

Turn off water faucets before connecting hoses.
Connect hoses to washer inlet valves (red for hot, blue for cold).
Secure drain hose to prevent slipping or siphoning.
Check for leaks after turning water on.

Tip: Use only new hoses; do not overtighten connections.

Operating the Washer

Follow steps for washing clothes.

Load laundry: Open lid, add sorted clothes evenly. Do not overload.
Add detergent: Pour into dispenser or directly into tub as directed.
Select cycle: Turn knob to desired wash cycle.
Set options: Choose temperature, spin speed, soil level, and any extra options.
Start cycle: Press START/PAUSE. Lid will lock during cycle.
Monitor: Status lights show progress. Cycle completes with signal.
Unload: Wait for lid to unlock, remove clothes promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Special Features

Deep Water Wash: Adds more water for heavily soiled loads. Delay Start: Set wash to begin up to 24 hours later. Quick Wash: Reduced time cycle for lightly soiled items. Signal Control: Turn end-of-cycle signal on or off.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean tub monthly using washer cleaner or vinegar cycle.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; press START/PAUSE.
No water filling	Water supply/hoses	Check faucets are on; inspect hoses for kinks; ensure inlet filters clean.
Water leaks	Loose connections	Tighten hose connections; check drain hose is secure.
Excessive vibration	Load/leveling	Redistribute load evenly; ensure washer is level on floor.
Clothes too wet after spin	Spin speed/load	Select higher spin speed; do not overload; check drain hose for blockage.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com