Whirlpool Cabrio WTW8000BW0 Washer Manual

The Whirlpool Cabrio WTW8000BW0 is a high-efficiency top-loading washer featuring an Adaptive Wash System, IntelliFill automatic water level sensing, 10 wash cycles, 5 soil levels, 4 spin speeds, and a stainless steel wash basket. It includes options for deep water wash, extra rinse, and delay start, and is ENERGY STAR certified. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Lid, Stainless Steel Wash Basket, Agitator, Water Inlet Valves, Drain Pump, Leveling Legs.

Feature	Description
Adaptive Wash System	Automatically adjusts wash actions based on load size and type
IntelliFill Technology	Senses load size to add the correct amount of water
Stainless Steel Wash Basket	Durable and resists rust and chipping
10 Wash Cycles	Includes Normal, Heavy, Delicates, Quick Wash, Bulky Items, and more
5 Soil Levels	Light, Normal, Heavy, Extra Heavy, and Max Extract
4 Spin Speeds	Delicate, Low, Medium, High
Deep Water Wash Option	Adds more water for certain cycles
Extra Rinse Option	Adds an additional rinse cycle
Delay Start	Delays cycle start up to 12 hours
ENERGY STAR Certified	Meets energy efficiency guidelines

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove shipping materials: Take out transit bolts and packing from inside the drum.
Level the washer: Adjust the front leveling legs; use a level to ensure it's balanced.
Connect water supply: Attach hot and cold water hoses to corresponding faucets (red for hot, blue for cold).
Connect drain hose: Insert into standpipe or laundry tub; secure with hose guide if provided.
Plug into a grounded 120V, 60Hz electrical outlet.

WARNING! Do not remove transit bolts before moving washer into final position. Ensure water connections are tight to prevent leaks.

First-Time Setup

After installation, run a cleaning cycle before first use.

Power on washer: Plug in and press POWER button.
Run Clean Washer cycle: Add a washing machine cleaner or 1 cup of bleach to the basket, select Clean Washer cycle, and start.
Set preferences (optional): Use the control panel to set default options like End-of-Cycle Signal.
Load laundry: Sort fabrics and check pockets.
Add detergent: Use HE (High-Efficiency) detergent only. Pour into the detergent dispenser.

CAUTION! Use only HE detergent. Conventional detergent can cause oversudsing and damage.

Specifications

Model: WTW8000BW0
Type: Top-Loading High-Efficiency Washer
Capacity: 4.5 cu. ft.
Color: White
Control: Electronic with LED Display
Water Connections: Hot & Cold
Voltage: 120V AC, 60Hz
Power Cord: 5 ft. grounded cord included
Dimensions (HxWxD): 44" x 27" x 28" (approx.)
Warranty: 1-Year Full, 10-Year Limited on Tub

Controls and Settings

Access settings via the control panel. Main Controls: POWER, START/PAUSE, CYCLE KNOB, OPTIONS buttons.

Cycle Knob: Turn to select from 10 cycles (Normal, Heavy, Delicates, Quick Wash, Bulky Items, Hand Wash, Rinse & Spin, Spin Only, Clean Washer, Drain & Spin).

Options: Soil Level (Light to Max Extract), Spin Speed (Delicate to High), Deep Water, Extra Rinse, Delay Start, Signal (On/Off). Display shows estimated time remaining, cycle status, and selected options.

Connecting Utilities

Water: Hot and cold hoses. Drain: Standpipe or laundry tub. Electrical: Grounded outlet.

Turn off water supply at faucets before connecting hoses.
Use only new hoses; do not reuse old ones.
Ensure drain hose is not pushed more than 5 inches into standpipe to prevent siphoning.
Plug into a dedicated outlet; avoid extension cords.

Tip: Periodically check hoses for bulges, kinks, or leaks.

Operating the Washer

Follow these steps for each wash load.

Power on: Press POWER button.
Load laundry: Open lid, add sorted clothes loosely. Do not overload.
Add detergent: Pour HE detergent into the main wash compartment of the dispenser.
Add additives (optional): Pour bleach into the bleach compartment, fabric softener into the softener compartment.
Select cycle: Turn CYCLE KNOB to desired setting.
Select options: Press OPTIONS buttons for Soil Level, Spin Speed, etc.
Start: Close lid and press START/PAUSE. The washer will fill, sense load, and begin.
Pause/Stop: Press START/PAUSE once to pause; press and hold to cancel cycle.

WARNING! Do not open lid during spin cycle. Wait until basket stops completely.

Special Features

Adaptive Wash: Automatically adjusts wash actions for optimal cleaning. IntelliFill: Measures load to use correct water level. Deep Water Wash: Manually adds more water for heavily soiled loads. Delay Start: Programs washer to start later (up to 12 hours). Clean Washer Cycle: Runs a maintenance cycle to clean the basket and remove odors.

Care & Cleaning

Unplug before cleaning. Wipe exterior with a soft, damp cloth. Clean detergent dispenser monthly by removing and rinsing. Run Clean Washer cycle monthly using washer cleaner or bleach. Keep area around washer clean and dry.

CAUTION! Do not use abrasive cleaners or solvents. Never spray water directly on controls.

Regulatory Information

UL Listed. Complies with U.S. Federal energy conservation standards. ENERGY STAR partner. For support, visit www.whirlpool.com or contact 1-800-253-1301. Model WTW8000BW0.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/Lid	Ensure washer is plugged in and outlet works. Close lid securely.
No water filling	Water supply/hoses	Check that water faucets are on. Inspect hoses for kinks.
Excessive vibration/noise	Leveling/load	Ensure washer is level. Load may be unbalanced; redistribute clothes.
Water leaks	Hose connections	Tighten hose connections. Check drain hose for proper placement.
Clothes too wet after spin	Spin speed/load	Select higher spin speed. Load may be too small for proper extraction.
Error codes on display	Various faults	Refer to error code chart in manual. Common codes: F1-E1 (water fill), F5-E3 (drain issue).

Reset: Unplug washer for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com