Whirlpool Cabrio WTW7040DW1 Washer Manual

The Whirlpool Cabrio WTW7040DW1 is a high-efficiency top-loading washer featuring a 4.3 cubic foot capacity, 11 wash cycles, 5 soil levels, 5 spin speeds, and IntelliFill™ automatic water level sensing. It includes options for deep water wash, extra rinse, and delay start, along with a stainless steel wash basket and electronic controls with LED display. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel with LED display, Stainless steel wash basket, IntelliFill™ water sensor, 11 wash cycles, 5 soil levels, 5 spin speeds, and built-in water faucets connections.

Feature	Description
Capacity	4.3 cubic feet
Wash Cycles	11 cycles including Normal, Heavy, Delicates, Quick Wash, and Bulky Items
Soil Levels	5 levels (Light, Normal, Heavy, Extra Heavy, Max)
Spin Speeds	5 speeds including No Spin, Delicate, Low, Medium, High
IntelliFill™	Automatically senses load size and adds correct amount of water
Deep Water Wash	Option for additional water during wash cycle
Extra Rinse	Adds an additional rinse cycle
Delay Start	Delays cycle start up to 12 hours
Control Lock	Prevents accidental changes to cycle settings
Stainless Steel Basket	Durable and resists rust and chipping

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take off cardboard base, foam blocks, and tape.
Level the washer: Adjust leveling legs until washer is stable and doesn't rock.
Connect water supply: Attach hot and cold water hoses to faucets and washer inlet valves.
Connect drain hose: Insert into standpipe or laundry tub; secure with hose clip.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cleaning cycle.

Turn on water supply: Open both hot and cold water faucets fully.
Power on washer: Press POWER button on control panel.
Run clean washer cycle: Select "Clean Washer" cycle and press START.
Set preferences: Use OPTIONS button to set default settings if desired.

CAUTION! Do not use bleach during clean washer cycle. Ensure washer is level before operation.

Specifications

Model: WTW7040DW1
Type: Top-loading high-efficiency washer
Capacity: 4.3 cubic feet
Dimensions: 27" W x 27" D x 43" H
Voltage: 120V, 60Hz
Water Connections: Hot and cold water faucets required
Cycle Time: Varies by cycle (approx. 30-75 minutes)
Warranty: 1-year limited warranty
Weight: 150 lbs

Controls and Settings

Control Panel: POWER, CYCLE KNOB, OPTIONS, START/PAUSE, CONTROL LOCK.

Cycle Selection: Turn knob to select desired wash cycle (Normal, Heavy, Delicates, Quick Wash, Bulky, Hand Wash, Rinse & Spin, Drain & Spin, Clean Washer).

Options: Press OPTIONS to select Soil Level (Light to Max), Spin Speed (No Spin to High), Deep Water, Extra Rinse, Delay Start.

LED Display: Shows cycle time, settings, and status messages.

Control Lock: Press and hold CONTROL LOCK for 3 seconds to lock/unlock controls.

Connecting Water Supply

Hot and cold water connections required for optimal performance.

Turn off water faucets before connecting hoses.
Connect hoses: Attach hot water hose to hot water faucet and red inlet valve; cold to cold faucet and blue valve.
Hand-tighten connections; do not overtighten.
Check for leaks: Turn on water faucets and inspect connections.

Tip: Use only new hoses; replace hoses every 5 years to prevent failure.

Using Wash Cycles

Follow these steps for washing clothes.

Load clothes: Do not overload; leave space at top of basket.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn knob to desired cycle.
Set options: Press OPTIONS to adjust soil level, spin speed, etc.
Start: Press START/PAUSE to begin cycle.
Pause: Press START/PAUSE to pause; press again to resume.
Unload: Remove clothes promptly after cycle ends to prevent wrinkles.

WARNING! Do not wash items soaked in gasoline or flammable substances. Keep lid closed during operation.

Special Features

IntelliFill™: Automatically senses load size and adds correct water amount. Deep Water Wash: Adds more water for heavily soiled loads. Extra Rinse: Adds rinse cycle for sensitive skin. Delay Start: Delays start up to 12 hours. Control Lock: Prevents accidental changes.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean exterior: Wipe with damp cloth; do not use abrasive cleaners.
Clean basket: Run "Clean Washer" cycle monthly.
Clean dispensers: Remove and rinse detergent and bleach dispensers.
Check hoses: Inspect for cracks or leaks regularly.

CAUTION! Unplug washer before cleaning. Do not use harsh chemicals on control panel.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; press POWER.
No water filling	Water supply/hoses	Check water faucets are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Level washer; redistribute load; remove shipping materials.
Leaking water	Loose connections	Tighten hose connections; check drain hose installation.
Clothes too wet	Spin speed/drain	Select higher spin speed; check drain hose for blockage.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-253-1301; www.whirlpool.com