Whirlpool Cabrio WED8000DW4 Dryer Manual

The Whirlpool Cabrio WED8000DW4 is an electric dryer with 7.4 cu. ft. capacity, featuring Advanced Moisture Sensing technology, Wrinkle Shield option, multiple dry cycles (Auto Dry, Timed Dry, Air Fluff), temperature settings, end-of-cycle signal, and stainless steel drum. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Cycle Selection 7. Advanced Features 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity stainless steel drum, electronic controls, lint screen, moisture sensors, wrinkle prevention option.

Feature	Description
Capacity	7.4 cubic feet stainless steel drum
Moisture Sensing	Automatically detects dryness level
Wrinkle Shield	Tumbles periodically after cycle to reduce wrinkles
Cycle Options	Auto Dry, Timed Dry, Air Fluff, Delicates
Temperature Settings	High, Medium, Low, No Heat
End of Cycle Signal	Audible alert when drying complete
Control Lock	Prevents accidental changes to settings
Dryness Level	More Dry, Normal, Less Dry options
Power Source	240V electric
Display	LED status indicators

Installation

Unpack and inspect contents. Ensure proper electrical connection.

Location: Place on level surface with adequate clearance for ventilation.
Electrical: Connect to dedicated 240V outlet with proper grounding.
Venting: Install 4-inch diameter metal venting to outdoors.
Leveling: Adjust leveling legs for stability.
Gas connection (if applicable): For gas models, ensure proper gas line connection by qualified technician.

WARNING! Dryer is heavy; use two people for moving. Ensure proper electrical connection to prevent fire hazard.

First-Time Setup

Complete installation and prepare for first use.

Remove shipping materials: Check drum and remove all packing materials.
Level the dryer: Adjust feet until dryer sits firmly on floor.
Connect power: Plug into dedicated 240V outlet.
Test operation: Run empty on Air Fluff cycle to ensure proper function.
Set preferences: Configure end-of-cycle signal and default settings.

CAUTION! Do not operate without proper venting installed. Ensure lint screen is in place before use.

Specifications

Capacity: 7.4 cubic feet
Drum Material: Stainless steel
Power Requirements: 240V AC, 60Hz
Dry Cycles: Auto Dry, Timed Dry, Air Fluff, Delicates, Heavy Duty
Temperature Settings: High, Medium, Low, No Heat
Moisture Sensing: Advanced electronic moisture detection
Wrinkle Prevention: Wrinkle Shield option
Control Lock: Yes
Dimensions: Standard dryer dimensions
Weight: Approximately 130 pounds

Controls and Settings

Electronic control panel with cycle selection knob and push buttons.

Main Controls: Cycle Selection Knob, Start/Pause, Temperature, Dryness Level, Wrinkle Shield, Signal Volume.

Cycle Options: Auto Dry (uses moisture sensing), Timed Dry (manual time setting), Air Fluff (no heat), Delicates (gentle drying), Heavy Duty (maximum drying). Temperature Settings: High (cotton), Medium (permanent press), Low (delicates), No Heat (air only). Additional Features: Wrinkle Shield (tumbles periodically after cycle), Control Lock (prevents accidental changes), End of Cycle Signal (adjustable volume).

Cycle Selection

Choose appropriate cycle for fabric type and drying needs.

Auto Dry: Uses moisture sensors for optimal drying; select dryness level.
Timed Dry: Set specific drying time from 10-140 minutes.
Air Fluff: No heat for fluffing pillows or refreshing items.
Delicates: Low heat gentle drying for delicate fabrics.
Heavy Duty: Maximum drying for heavy items like towels and jeans.
Quick Dry: Reduced time for lightly worn items.

Tip: Use Auto Dry with moisture sensing for energy efficiency and fabric protection.

Advanced Features

Moisture Sensing: Automatically detects when clothes are dry and stops cycle. Wrinkle Shield: Continues tumbling periodically for up to 120 minutes after cycle ends. Control Lock: Press and hold for 3 seconds to lock/unlock controls.

Care & Cleaning

Regular maintenance ensures optimal performance and safety.

Clean lint screen before every load.
Monthly: Check and clean venting system.
Quarterly: Wipe drum interior with damp cloth.
Annually: Have venting system professionally cleaned.

CAUTION! Never operate without lint screen. Keep dryer area free of flammable materials.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed/power	Ensure door fully closed; check power connection; reset circuit breaker.
Clothes not drying	Lint/venting	Clean lint screen; check venting for obstructions; verify proper cycle selection.
Noisy operation	Objects in drum/installation	Check for objects in drum; ensure dryer is level; verify proper installation.
Error codes displayed	Sensor/component issues	Consult error code chart in manual; reset dryer; contact service if persistent.
Overheating	Venting blockage	Clean venting system; ensure adequate airflow; check lint screen.

Reset: Unplug for 2 minutes to reset electronic controls.

Service: 1-800-253-1301; www.whirlpool.com