Manual for Whirlpool Washer WTW5015LW0

The Whirlpool WTW5015LW0 is a top-loading washing machine with a large capacity, multiple wash cycles, and advanced features for efficient cleaning. It includes options for water temperature, spin speed, soil level, and special settings for different fabric types. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading agitator, Control Panel, Lid, Water Inlet Valves, Drain Pump, Power Cord.

Feature	Description
Control Panel	For selecting wash cycles and settings
Agitator	Moves clothes through water for effective cleaning
Lid Lock	Safety feature to prevent opening during cycle
Water Inlet Valves	For hot and cold water connections
Drain Pump	Removes water from tub
Power Cord	For electrical connection
Cycle Selector Knob	Selects wash cycles (Normal, Heavy, Delicate, etc.)
Temperature Selector	Chooses water temperature (Hot, Warm, Cold)
Spin Speed Selector	Adjusts spin speed (High, Medium, Low)
Start/Pause Button	Starts or pauses wash cycle

Installation

Unpack and inspect contents. Place on level floor.

Connect water supply: Attach hot and cold hoses to corresponding inlet valves and faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Level the washer: Adjust leveling legs to prevent vibration.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; lift with care to avoid injury. Ensure all connections are secure and leak-free.

First-Time Setup

Power on washer; follow initial setup steps.

Run a test cycle: Select Normal cycle with hot water to clean tub.
Set preferences: Use control panel to adjust default settings if needed.
Load laundry: Do not overload; follow capacity guidelines.
Add detergent: Use recommended amount for load size and soil level.

CAUTION! Ensure washer is level and stable before use.

Specifications

Capacity: 3.5 cubic feet.
Type: Top-loading agitator.
Controls: Mechanical dial with push buttons.
Cycle Options: Normal, Heavy, Delicate, Quick Wash, Rinse & Spin.
Temperature Settings: Hot, Warm, Cold.
Spin Speeds: High, Medium, Low.
Power Requirements: 120V AC, 60Hz.
Water Connections: Hot and cold inlet hoses.
Dimensions: Standard size for residential use.

Controls and Settings

Access settings via Control Panel. Cycle Selector Knob: Choose wash cycle. Temperature Selector: Set water temperature. Spin Speed Selector: Adjust spin speed. Start/Pause Button: Begin or halt cycle.

Cycle Details: Normal (for everyday loads), Heavy (for heavily soiled items), Delicate (for gentle fabrics), Quick Wash (for small loads), Rinse & Spin (for extra rinsing or spinning).

Additional Options: Soil Level (Light, Normal, Heavy), Extra Rinse (adds rinse cycle), Pre-Wash (for heavily soiled loads).

Connecting Utilities

Water Supply: Hot and cold hoses. Drain: Hose to standpipe. Power: Grounded outlet.

Turn off water supply before connecting hoses.
Secure drain hose to prevent slipping.
Ensure electrical outlet is dedicated and grounded.

Tip: Check for leaks after connections; run a test cycle to confirm proper operation.

Using Wash Cycles

Supports various fabrics and soil levels.

Load laundry: Open lid, place clothes evenly in tub.
Add detergent: Pour into dispenser or directly into tub.
Select cycle: Turn knob to desired cycle.
Set options: Choose temperature, spin speed, soil level.
Start cycle: Press Start/Pause button.
Monitor: Lid locks during operation; unlocks at end.
Unload: Remove clothes promptly to prevent wrinkles.

WARNING! Do not overload; balance load to reduce vibration. Keep lid closed during cycle.

Special Features

Extra Rinse: Adds rinse cycle for sensitive skin or detergent residue. Pre-Wash: Soaks heavily soiled items before main wash. Delay Start: Set timer to start cycle later. Lid Lock: Prevents opening during spin for safety.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean tub monthly with washer cleaner.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Whirlpool Corporation; trademarks owned by Whirlpool. Energy Star: Meets efficiency guidelines. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Supply valves/hoses	Open water valves; check for kinks in hoses; clean inlet screens.
Excessive vibration	Load/leveling	Balance load; adjust leveling legs; ensure floor is solid.
Water not draining	Drain hose/clog	Check hose for obstructions; clean pump filter.
Leaking water	Connections/hoses	Tighten hose connections; inspect for cracks; replace if damaged.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-253-1301; www.whirlpool.com