The Whirlpool WTW8127LW is a top-loading washer with 4.3 cu. ft. capacity, featuring 12 wash cycles, 5 soil levels, stainless steel wash basket, automatic temperature control, deep water wash option, quick wash cycle, delay start, and energy-saving features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Control panel with digital display, stainless steel wash basket, agitator, water inlet valves, drain pump, and leveling legs.
| Feature | Description |
|---|---|
| Capacity | 4.3 cubic feet stainless steel basket |
| Wash Cycles | 12 cycles including Normal, Heavy, Delicates, Quick Wash |
| Soil Levels | 5 levels from Light to Extra Heavy |
| Temperature Control | Automatic temperature selection |
| Deep Water Wash | Extra water option for heavily soiled loads |
| Delay Start | Program start time up to 24 hours |
| Quick Wash | 30-minute cycle for lightly soiled items |
| Energy Star | Certified for energy efficiency |
| Control Lock | Prevents accidental changes during cycle |
| Signal | End of cycle signal |
Unpack and inspect contents. Place on level floor.
WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure before use.
Before first use, run a cleaning cycle.
CAUTION! Ensure washer is level to prevent vibration and movement during spin cycles.
Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, SOIL LEVEL, OPTIONS, START/PAUSE.
Cycle Selection: Normal, Heavy, Delicates, Quick Wash, Bulky Items, Hand Wash, Sanitize, Rinse & Spin, Drain & Spin, Clean Washer.
Temperature Settings: Tap Cold, Cold, Cool, Warm, Hot. Spin Speed: High, Medium, Low, No Spin. Soil Level: Light, Normal, Heavy, Extra Heavy. Options: Deep Water, Delay Start, Control Lock, Signal.
Hot and cold water connections required for optimal performance.
Tip: Use new hoses and replace every 5 years to prevent leaks.
Follow these steps for proper operation.
WARNING! Do not overload washer. Balance load for proper spinning.
Deep Water Wash: Extra water for heavily soiled loads. Quick Wash: 30-minute cycle for lightly soiled items. Delay Start: Program start time up to 24 hours. Control Lock: Prevents accidental changes. Clean Washer Cycle: Maintains washer cleanliness.
Regular maintenance ensures optimal performance.
CAUTION! Unplug washer before cleaning. Do not use abrasive cleaners.
UL Listed; complies with U.S. safety standards. Energy Star certified for energy efficiency. Copyright © 2023 Whirlpool Corporation; all rights reserved. For support, visit www.whirlpool.com or contact 1-800-253-1301.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Washer won't start | Power/control lock | Check power supply; ensure control lock is off; close lid properly. |
| No water filling | Water supply/valves | Check water supply valves are open; inspect hoses for kinks. |
| Excessive vibration | Leveling/load balance | Ensure washer is level; redistribute load evenly. |
| Water not draining | Drain hose/clog | Check drain hose for kinks; clear any clogs in pump filter. |
| Leaking water | Hoses/connections | Tighten hose connections; replace damaged hoses. |
| Poor cleaning | Detergent/loading | Use correct amount of HE detergent; avoid overloading. |
Reset: Unplug for 1 minute to reset control system.
Service: 1-800-253-1301; www.whirlpool.com