Manual for Whirlpool Washer Model WTW5057LW0

The Whirlpool WTW5057LW0 is a top-loading washing machine with 3.5 cubic foot capacity, featuring multiple wash cycles, stainless steel wash basket, automatic temperature control, deep water wash option, and energy-efficient operation. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel wash basket, Control panel with LED display, Water inlet valves, Drain pump, Leveling legs.

Feature	Description
Capacity	3.5 cubic feet stainless steel basket
Wash Cycles	Normal, Heavy, Delicates, Quick Wash, Bulky Items
Temperature Settings	Hot, Warm, Cold, Tap Cold
Spin Speeds	High, Medium, Low, No Spin
Soil Levels	Heavy, Normal, Light
Deep Water Wash	Extra water option for heavily soiled loads
Automatic Temperature Control	Maintains selected water temperature
LED Display	Shows cycle time and settings
End of Cycle Signal	Audible alert when cycle completes
Energy Star Certified	Meets energy efficiency standards

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove transit bolts and packing materials from drum.
Level the washer: Adjust leveling legs to ensure washer is stable and level.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Position drain hose properly in standpipe or laundry tub.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure before use.

First-Time Setup

Before first use, run an empty cycle with bleach to clean the drum.

Remove all packaging materials and tape.
Connect water supply and drain hose properly.
Plug into electrical outlet.
Run clean cycle: Add 1 cup bleach, select Normal cycle with hot water.
Test operation: Run a small load to verify proper functioning.

CAUTION! Do not operate without removing transit bolts. Ensure washer is level to prevent vibration.

Specifications

Model: WTW5057LW0
Capacity: 3.5 cubic feet
Basket Material: Stainless steel
Water Connections: Hot and cold water inlet
Electrical: 120V, 60Hz, 15A
Dimensions: 27" W x 27" D x 43" H
Weight: 135 lbs
Wash Cycles: 10 cycles including Quick Wash and Bulky Items
Temperature Settings: 4 temperature options
Spin Speeds: 4 speed options
Energy Star: Yes

Controls and Settings

Control Panel: POWER, CYCLE KNOB, TEMPERATURE, SPIN SPEED, SOIL LEVEL, START/PAUSE, DEEP WATER WASH.

Cycle Selection: Turn knob to select desired wash cycle. LED display shows estimated time.

Temperature: Select Hot, Warm, Cold, or Tap Cold for wash and rinse cycles. Spin Speed: Choose High, Medium, Low, or No Spin. Soil Level: Adjust for Heavy, Normal, or Light soil. Deep Water Wash: Add extra water for heavily soiled loads. Delay Start: Set delayed start time if available.

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Proper drain hose installation.

Turn off water supply before connecting hoses.
Connect hot water hose to hot water faucet (red connector).
Connect cold water hose to cold water faucet (blue connector).
Secure drain hose in standpipe or laundry tub.
Ensure all connections are tight and leak-free.

Tip: Use only new hoses; do not reuse old hoses. Check for leaks during first use.

Operating the Washer

Follow these steps for proper operation.

Load laundry: Do not overload; leave space for items to move freely.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Set temperature, spin speed, and soil level as needed.
Start washer: Press START/PAUSE button.
Monitor operation: LED display shows remaining time.
Remove laundry promptly when cycle completes.

WARNING! Do not overload washer. Use only HE detergent. Close lid during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean drum monthly: Run empty cycle with washer cleaner or bleach.
Wipe exterior: Use damp cloth with mild detergent.
Clean lint filter: Remove and clean filter regularly.
Inspect hoses: Check for cracks or leaks every 6 months.
Keep area around washer clean and dry.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners.

Regulatory Information

UL Listed: Complies with UL safety standards. Energy Star Certified: Meets energy efficiency requirements. Copyright © 2025 Whirlpool Corporation; all rights reserved. For support, visit www.whirlpool.com or contact 1-800-253-1301.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Check power connection; ensure lid is closed properly.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose position; clear any clogs.
Leaking water	Hoses/connections	Tighten hose connections; replace damaged hoses.
Unusual noise	Objects in drum	Check for foreign objects; remove if found.

Reset: Unplug for 5 minutes, then restart if error occurs.

Service: 1-800-253-1301; www.whirlpool.com